Virginia Tech® home

Journal Papers

Recent Publications
Conference Papers
Theses & Dissertations

(Updated: April 2024) Type the author's name (e.g., Smith) or key term (e.g., construction) in the Search box to view relevant papers.

Year  Paper
2024 Park, J. H., Madigan, M. L., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2024) Wearing a back-support exoskeleton alters lower-limb joint kinetics during single-step recovery following a forward loss of balance, Journal of Biomechanics, 166: 112069 (9 pages).
2024 Alshehri, M. A., Alzahrani, H., van den Hoorn, W., Klyne, D. M., Vette, A. H., Hendershot, B. D., Roberts, B. W. R., Larivière, C., Barbado, D., Vera-Garcia, F. J., van Dieen, J. H., Cholewicki, J., Nussbaum, M. A., Madigan, M. L., Reeves, N. P., Silfies, S. P., Brown, S. H. M. & Hodges, S. H. M. (2024) Trunk postural control during unstable sitting among individuals with and without low back pain: A systematic review with an individual participant data meta-analysis, PLoS ONE, 19(1): e0296968.
2024 Gutierrez, N., Ojelade, A., Kim, S., Barr, A., Akanmu, A., Nussbaum, M. A. & Harris-Adamson, C. (2024) Perceived benefits, barriers, perceptions, and readiness to use exoskeletons in the construction industry: Differences by demographic characteristics, Applied Ergonomics, 116: 104199 (12 pages).
2024 Dooley, S., Kim, S., Nussbaum, M. A. & Madigan, M. L. (2024) Occupational arm-support and back-support exoskeletons elicit changes in reactive balance after slip-like and trip-like perturbations on a treadmill, Applied Ergonomics, 115: 104178.
2023 Lim, S. & Yang, X. (2023) Real-time vibrotactile feedback system for reducing trunk flexion exposure during construction tasks, Applied Ergonomics, 110: 104019.
2023 Ojelade, A., Morris, W., Kim, S., Kelson, D., Srinivasan, D., Smets, M. & Nussbaum, M. A. (2023) Three passive arm-support exoskeletons have inconsistent effects on muscle activity, posture, and perceived exertion during diverse simulated pseudo-static overhead nutrunning tasks, Applied Ergonomics, 110: 104015 (9 pages).
2023 Park, H., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2023) A pilot study investigating motor adaptations when learning to walk with a whole-body powered exoskeleton, Journal of Electromyograhy and Kinesiology, 69: 102755 (14 pages).
2023 Dooley, S., Kim, S., Nussbaum, M. A. & Madigan, M. L. (2023) A passive leg-support exoskeleton adversely affects reactive balance after simulated slips and trips on a treadmill, Journal of Biomechanics, 151: 111533 (5 pages).
2022 Islam, M. S., Lee, S. W., Harden, S. M. & Lim, S. (2022) Effects of vibrotactile feedback on yoga practice, Frontiers in Sports and Active Living, 4: 1005003 (21 pages).
2023 Rashedi, E., Kathawala, K., Abdollahi, M., Alemi, M. M., Mokhlespour Esfahani, M. I. & Nussbaum, M. A. (2023) Recovering from Laboratory-Induced slips and trips causes high levels of lumbar muscle activity and spine loading, Journal of Electromyography and Kinesiology, 68: 102743 (7 pages).
2023 Madinei, S. & Nussbaum, M. A. (2023) Estimating lumbar spine loading when using back-support exoskeletons in lifting tasks, Journal of Biomechanics, 147: 111439 (7 pages).
2022 Madinei, S., Kim, S., Park, J. H., Srinivasan, D. & Nussbaum, M. A. (2022) A novel approach to quantify the assistive torque profiles generated by passive back-support exoskeletons, Journal of Biomechanics, 145: Article Number 111363.
2022 Ulman, S., Srinivasan, D. & Nussbaum, M. A. (2022) Task demand and load carriage experience affect gait variability among military cadets, Scientific Reports, 12: 18347 (10 pages).
2022 Park, J. H., Lee, Y., Madgian, M. L., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2022) Wearing a back-support exoskeleton impairs single-step balance recovery performance following a forward loss of balance – An exploratory study, Journal of Biomechanics, 144: Article Number 111352.
2023 Lim, S., Luo, Y., Lee-Confer, J., & D'Souza, C. (2023) Obstacle Clearance Performance in Individuals with High Body Mass Index, Applied Ergonomics, 106, 103879.
2022 Schwerha, D., McNamara, N., Kim, S. & Nussbaum, M. A. (2022) Exploratory Field Testing of Passive Exoskeletons in Several Manufacturing Environments: Perceived Usability and User Acceptance, IISE Transactions on Occupational Ergonomics and Human Factors, 10(2): 71-82.
2022 Park, J. H., Lee, Y., Madinei, S., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2022) Effects of Back-Support Exoskeleton Use on Lower Limb Joint Kinematics and Kinetics During Level Walking, Annals of Biomedical Engineering, 50: 964-977.
2022 Kim, S., Nussbaum, M. A. & Smets, M. (2022) User Acceptance, and Health Outcomes of Arm-Support Exoskeleton Use in Automotive Assembly, Journal of Occupational and Environmental Medicine, 64(3): 202-211.
2021 Tsao, L., Kim, S., Ma, L. & Nussbaum, M. A. (2021). An exploratory study comparing three work-rest schedules during simulated repetitive precision work, Ergonomics, 64(12): 1579-1594.
2022 Park, J. H., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2022). Effects of back-support exoskeleton use on gait performance and stability during level walking, Gait & Posture, 92: 181-190.
2021 Kim, S., Nussbaum, M. A., Smets, M. & Ranganathan, S. (2021). Effects of an arm‐support exoskeleton on perceived work intensity and musculoskeletal discomfort: An 18‐month field study in automotive assembly, American Journal of Industrial Medicine, 64(11): 905-914.
2022 Park, H., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2022). Effects of using a whole-body powered exoskeleton during simulated occupational load-handling tasks: A pilot study, Applied Ergonomics, 98(1): 103589 (12 pages).
2021 Madinei, S., Kim, S., Srinivasan, D. & Nussbaum, M. A. (2021). Effects of Back-Support Exoskeleton Use on Trunk Neuromuscular Control during Repetitive Lifting: A Dynamical Systems Analysis, Journal of Biomechanics, 123: Paper 110501 (6 pages).
2021 Kim, S., Srinivasan, D., Nussbaum, M. A. & Leonessa, A. (2021). Human Gait During Level Walking With an Occupational Whole-Body Powered Exoskeleton: Not Yet a Walk in the Park, IEEE Access, 9: 47901-47911.
2021 Schwerha, D. J., McNamara, N., Nussbaum, M. A. & Kim, S. (2021). Adoption potential of occupational exoskeletons in diverse enterprises engaged in manufacturing tasks, International Journal of Industrial Ergonomics, 82: 103103 (8 pages).
2021 Porta, M., Kim, S., Pau, M. & Nussbaum, M. A. (2021). Classifying diverse manual material handling tasks using a single wearable sensor, Applied Ergonomics, 93: 103386 (10 pages).
2021 Park, J. H., Kim, S., Nussbaum, M. A. & Srinivasan, D. (2021). Effects of two passive back-support exoskeletons on postural balance during quiet stance and functional limits of stability, Journal of Electromyography and Kinesiology, 57: 102516 (10 pages).
2020 Porta, M., Pau, M., Orrù, P. F. & Nussbaum, M. A. (2020). Trunk Flexion Monitoring among Warehouse Workers Using a Single Inertial Sensor and the Influence of Different Sampling Durations, International Journal of Environmental Research and Public Health, 17(19): 7117 (12 pages).
2020 Sedighi, A., Rashedi, E. & Nussbaum, M. A. (2020). A head-worn display (“smart glasses”) has adverse impacts on the dynamics of lateral position control during gait, Gait & Posture, 81: 126-130.
2020 Adeleye, A. A., Alabdulkarim, S. A. & Nussbaum, M. A. (2020). Impacts of different fabric scissor designs on physical demands and performance in simulated fabric cutting tasks, Applied Ergonomics, 89: 103219 (9 pages).
2020 Kim, S., Madinei, S., Alemi, M. M., Srinivasan, D. & Nussbaum, M. A. (2020). Assessing the potential for “undesired” effects of passive back-support exoskeleton use during a simulated manual assembly task: Muscle activity, posture, balance, discomfort, and usability, Applied Ergonomics, 89: 103194 (8 pages).
2020 Tsao, L., Nussbaum, M. A., Kim, S. & Ma, L. (2020). Modelling performance during repetitive precision tasks using wearable sensors: a data-driven approach, Ergonomics, 63(7): 831-849.
2020 Madinei, S., Alemi, M. M., Kim, S., Srinivasan, D. & Nussbaum, M. A. (2020). Biomechanical assessment of two back-support exoskeletons in symmetric and asymmetric repetitive lifting with moderate postural demands, Applied Ergonomics, 88: 103153 (10 pages).
2020 Madinei, S., Alemi, M. M., Kim, S., Srinivasan, D., & Nussbaum, M. A. (2020). Biomechanical Evaluation of Passive Back-Support Exoskeletons in a Precision Manual Assembly Task: “Expected” Effects on Trunk Muscle Activity, Perceived Exertion, and Task Performance, Human Factors, 62(3): 441–457.
2020 Alemi, M. M., Madinei, S., Kim, S., Srinivasan, D., & Nussbaum, M. A. (2020). Effects of Two Passive Back-Support Exoskeletons on Muscle Activity, Energy Expenditure, and Subjective Assessments During Repetitive Lifting, Human Factors, 62(3): 458–474.
2019 Kim, S., Moore, A., Srinivasan, D., Akanmu, A., Barr, A., Harris-Adamson, C., Rempel, D. M. & Nussbaum, M. A. (2019). Potential of Exoskeleton Technologies to Enhance Safety, Health, and Performance in Construction: Industry Perspectives and Future Research Directions, IISE Transactions on Occupational Ergonomics and Human Factors, 7(3-4): 185-191.
2019 Kim, S. & Nussbaum, M. A. (2019). A Follow-Up Study of the Effects of An Arm Support Exoskeleton on Physical Demands and Task Performance During Simulated Overhead Work, IISE Transactions on Occupational Ergonomics and Human Factors, 7(3-4): 163-174.
2019 Nussbaum, M. A., Lowe, D., de Looze, M., Harris-Adamson, C. & Smets, M. (2019). An Introduction to the Special Issue on Occupational Exoskeletons, IISE Transactions on Occupational Ergonomics and Human Factors, 7(3-4): 153-162.
2019 Mokhlespour Esfahani, M. I. & Nussbaum, M. A. (2019). Classifying Diverse Physical Activities Using “Smart Garments", Sensors, 19(14): 3133 (14 pages).
2019 Sedigh, A. & Nussbaum, M. A. (2019). Exploration of different classes of metrics to characterize motor variability during repetitive symmetric and asymmetric lifting tasks, Scientific Reports, 9:9821 (9 pages).
2019 Alabdulkarim, S., Kim, S. & Nussbaum, M. A. (2019). Effects of exoskeleton design and precision requirements on physical demands and quality in a simulated overhead drilling task. Applied Ergonomics, 80, 136-145.
2019 Mokhlespour Esfahani, M.I., Nussbaum, M. A., & Kong, Z. J. (2019). Using a smart textile system for classifying occupational manual material handling tasks: evidence from lab-based simulations. Ergonomics, 62(6): 823-833.
2019 Allin, L. J., Nussbaum, M. A. & Madigan, M. L. (2019). Two Novel Slip Training Methods Improve the Likelihood of Recovering Balance After a Laboratory-Induced Slip. Journal of Applied Biomechanics, 35(1): 37-43.
2019 Koushyar, H., Bieryla, K. A., Nussbaum, M. A. & Madigan, M. L. (2019). Age-related strength loss affects non-stepping balance recovery. PLoS ONE, 14(1): e0210049.
2019 Barbieri, D. F., Srinivasan, D., Mathiassen, S. K. and Oliveira, A. B. (2019). Variation in upper extremity, neck and trunk postures when performing computer work at a sit-stand station. Applied Ergonomics, 75, 120-128.
2018 Barazandeh, B., Bastani, K., Rafieisakhaei, M., Kim, S., Kong, Z. J. and Nussbaum, M. A. (2018). Robust Sparse Representation-Based Classification Using Online Sensor Data for Monitoring Manual Material Handling Tasks. IEEE Transactions on Automation Science and Engineering, 15(4), 1573-1584.
2018 Srinivasan, D., Tengman, E., & Häger, C. K. (2018). Increased movement variability in one-leg hops about 20 years after treatment of anterior cruciate ligament injury. Clinical Biomechanics, 53, 37-45.
2019 Kim, S., Nussbaum, M. A. and Gabbard, J. L. (2019). Influences of augmented reality head-worn display type and user interface design on performance and usability in simulated warehouse order picking. Applied Ergonomics, 74, 186-193.
2018 Mokhlespour Esfahani, M.I. and Nussbaum, M. A. (2018). A “Smart” Undershirt for Tracking Upper Body Motions: Task Classification and Angle Estimation. IEEE Sensors Journal, 18(18), 7650-7658.
2019 Alabdulkarim, S. and Nussbaum, M. A. (2019). Influences of different exoskeleton designs and tool mass on physical demands and performance in a simulated overhead drilling task. Applied Ergonomics, 74, 55-66.
2018 Mokhlespour Esfahani, M.I. and Nussbaum, M. A. (2018). Preferred Placement and Usability of a Smart Textile System vs. Inertial Measurement Units for Activity Monitoring. Sensors, 18(8), 2501 (15 pages).
2018 Hughes-Oliver, C.N., Srinivasan, D., Schmitt, D. and Queen, R.M. (2018). Gender and limb differences in temporal gait parameters and gait variability in ankle osteoarthritis. Gait & Posture, 65, 228-233.
2018 Acasio, J. C., Butowicz, C. M., Golyski, P. R., Nussbaum, M. A. and Hendershot, B. D. (2018). Associations between trunk postural control in walking and unstable sitting at various levels of task demand. Journal of Biomechanics, 75: 181-185.
2018 Kim, S., Nussbaum, M.A., Mokhlespour Esfahani, M.I., Alemi, M.M., Alabdulkarim, S. and Rashedi, E. (2018). Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part I – “Expected” effects on discomfort, shoulder muscle activity, and work task performance. Applied Ergonomics, 70: 315-322.
2018 Kim, S., Nussbaum, M.A., Mokhlespour Esfahani, M.I., Alemi, M.M., Jia, B., and Rashedi, E. (2018). Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II – “Unexpected” effects on shoulder motion, balance, and spine loading. Applied Ergonomics, 70: 323-330.
2018 Weber, Z. R., Srinivasan, D., & Côté, J. N. (2018). Sex-Specific Links in Motor and Sensory Adaptations to Repetitive Motion-Induced Fatigue.. Motor Control, 22(2): 149-169.
2018 Allin, L. J., Nussbaum, M. A. and Madigan, M. L. (2018). Feet kinematics upon slipping discriminate between recoveries and three types of slip-induced falls. Ergonomics, 61(6): 866-876.
2018 Sedighi, A., Ulman, S. M. and Nussbaum, M. A. (2018). Information presentation through a head-worn display (“smart glasses”) has a smaller influence on the temporal structure of gait variability during dual-task gait compared to handheld displays (paper-based system and smartphone). PLoS ONE, 13(4): e0195106.
2018 Kim, S., Nussbaum, M. A. & Ulman, S. (2018). Impacts of using a head-worn display on gait performance during level walking and obstacle crossing. Journal of Electromyography and Kinesiology, 39, 142-148.
2018 Kim, S., Nussbaum, M. A., Laurienti, P. J., Chen, H., Quandt, S. A., Barr, D. B. and Arcury, T. A. (2018). Exploring Associations Between Postural Balance and Levels of Urinary Organophosphorus Pesticide Metabolites. Journal of Occupational and Environmental Medicine, 60(2): 174-179.
2015 Christian, M., & Nussbaum, M. A. (2015). An Exploratory Study of the Diurnal Variation and Reliability of Biomarkers Related to Physiological Damage Experienced in Work-Related Musculoskeletal Disorders.. MYOPAIN, 23(3-4): 83-93.
2017 Shewchuk, J. P., Nussbaum, M. A., Kim, S. and Sarkar, S. (2017). Simulation Modeling and Ergonomic Assessment of Complex Multiworker Physical Processes. IEEE Transactions on Human-Machine Systems, 47(6): 777-788.
2017 Kim, S., Nussbaum, M.A., Schoenfisch, A.L., Barrett, S.M., Bolding, M.C. and Dickerson, D.E. (2017). Occupational Safety and Health Concerns in Logging: A Cross-Sectional Assessment in Virginia. Forests, 8(11): 440-451.
2017 Sood, D., Nussbaum, M.A., Hager, K. & Nogueira, H.C. (2017). Predicted endurance times during overhead work: influences of duty cycle and tool mass estimated using perceived discomfort. Ergonomics, 60(10): 1405-1414.
2017 Alabdulkarim,S., Nussbaum, M.A., Rashedi, E., Kim, S., Agnew, M. & Gardner, R. (2017). Impact of task design on task performance and injury risk: case study of a simulated drilling task. Ergonomics, 60(6): 851-866.
2017 Arena, S.L., Garman, C.R., Nussbaum, M.A. and Madigan, M.L. (2017). Required friction during overground walking is lower among obese compared to non-obese older men, but does not differ with obesity among women. Applied Ergonomics, 62, 77-82.
2017 Barbieri, D. F., Mathiassen, S. E., Srinivasan, D., Dos Santos, W. M., Inoue, R. S., Siqueira, A. A. G., Nogueira, H. C. and Oliveira, A. B. (2017). Sit–Stand Tables With Semi-Automated Position Changes: A New Interactive Approach for Reducing Sitting in Office Work. IISE Transactions on Occupational Ergonomics and Human Factors, 5(1): 39-46.
2017 Luger, T., Mathiassen, S.E., Srinivasan, E. and Bosch, T. (2017). Influence of Work Pace on Upper Extremity Kinematics and Muscle Activity in a Short-Cycle Repetitive Pick-and-Place Task. Annals of Work Exposures and Health, 61(3): 356-368.
2017 Muslim, K., & Nussbaum, M. A. (2017). The effects of a simple intervention on exposures to low back pain risk factors during traditional posterior load carriage. Applied Ergonomics, 59, Part A, 313-319. 
2017 Rashedi, E. and Nussbaum, M.A. (2017). Quantifying the history dependency of muscle recovery from a fatiguing intermittent task, Journal of Biomechanics, 51, 26-31. 
2017 Rudolfsson, T., Björklund, M., Svedmark, Å., Srinivasan, D. and Djupsjöbacka, M. (2017). Direction-Specific Impairments in Cervical Range of Motion in Women with Chronic Neck Pain: Influence of Head Posture and Gravitationally Induced Torque. PLOS ONE, 12(1): e0170274. 
2017 Sandlund, J., Srinivasan, D., Heiden, M. and Mathiassen, S. E. (2017) Differences in motor variability among individuals performing a standardized short-cycle manual task, Human Movement Science, 51, 17-26. 
2016 Allin, L. J., Wu, X., Nussbaum, M. A., & Madigan, M. L. (2016). Falls resulting from a laboratory-induced slip occur at a higher rate among individuals who are obese. Journal of Biomechanics, 49(5): 678-683. 
2016 Barbieri, D. F., Srinivasan, D., Mathiassen, S. E., & Oliveira, A. B. (2016). Comparison of sedentary behaviors in office workers using sit-stand tables with and without semi-automated position changes. Human Factors, 59(5) 782-795. 
2016 Bastani, K., Kim, S., Kong, Z., Nussbaum, M. A. and Huang, W. (2016). Online Classification and Sensor Selection Optimization With Applications to Human Material Handling Tasks Using Wearable Sensing Technologies, IEEE Transactions on Human-Machine Systems, 46(4): 485-497. 
2016 Commissaris, D. A., Huysmans, M. A., Mathiassen, S. E., Srinivasan, D., Koppes, L. L., & Hendriksen, I. J. (2016). Interventions to reduce sedentary behavior and increase physical activity during productive work: a systematic review. Scandinavian Journal of Work, Environment & Health, 42(3): 181-191 
2016 Garman, C. R., Nussbaum, M. A., Franck, C. T., & Madigan, M. L. (2016). A Pilot Study Exploring Obesity-Related Differences in Fall Rate and Kinematic Response Resulting From a Laboratory-Induced Trip. IIE Transactions on Occupational Ergonomics and Human Factors, 4(4): 211-221. 
2016 Jia, B. and Nussbaum, M. A. (2016). Development and evaluation of an EMG-based model to estimate lumbosacral loads during seated work. International Journal of Industrial Ergonomics, 55, 96-102. 
2016 Kim, S., Nussbaum, M. A., & Gabbard, J. L. (2016). Augmented Reality “Smart Glasses” in the Workplace: Industry Perspectives and Challenges for Worker Safety and Health. IIE Transactions on Occupational Ergonomics and Human Factors, 4(4): 253-258. 
2016 Muslim, K., & Nussbaum, M. A. (2016). Traditional posterior load carriage: effects of load mass and size on torso kinematics, kinetics, muscle activity and movement stability. Ergonomics, 59(1): 99-111. 
2016 Rashedi, E., & Nussbaum, M. A. (2016). Cycle time influences the development of muscle fatigue at low to moderate levels of intermittent muscle contraction. Journal of Electromyography and Kinesiology, 28, 37-45. 
2016 Samani, A., Srinivasan, D., Mathiassen, S.E. and Madeleine, P. (2016). Variability in spatio-temporal pattern of trapezius activity and coordination of hand-arm muscles during a sustained repetitive dynamic task, Experimental Brain Research, 235(2): 389-400. (full-text, view-only version)
2016 Shojaei, I., Nussbaum, M.A., and Bazrgari, B. (2016) Age-related differences in trunk muscle reflexive behaviors, Journal of Biomechanics, 49(14): 3147-3152. 
2016 Shojaei, I., Vazirian, M., Croft, E., Nussbaum, M. A., & Bazrgari, B. (2016). Age related differences in mechanical demands imposed on the lower back by manual material handling tasks. Journal of Biomechanics, 49(6): 896-903. 
2016 Srinivasan, D., Sinden, K.E., Mathiassen, S.E. and Côté, J.N. (2016). Gender differences in fatigability and muscle activity responses to a short-cycle repetitive task, European Journal of Applied Physiology, 116(11-12): 2357-2365. (full-text, view-only version) 
2016 Sunwook, K., Nussbaum, M. A., Quandt, S. A., Laurienti, P. J., & Arcury, T. A. (2016). Effects of Lifetime Occupational Pesticide Exposure on Postural Control Among Farmworkers and Non-Farmworkers. Journal of Occupational and Environmental Medicine, 58(2): 133-139. 
2016 Vazirian, M., Shojaei, I., Tromp, R. L., Nussbaum, M. A., & Bazrgari, B. (2016). Age-related differences in trunk intrinsic stiffness. Journal of Biomechanics, 49(6): 926-932. 
2016 Wu, X., Nussbaum, M. A., & Madigan, M. L. (2016). Executive Function and Measures of Fall Risk Among People With Obesity. Perceptual and Motor Skills, 122(3): 825-839 
2016 Zhang, H., Nussbaum, M. A., & Agnew, M. J. (2016). Development of a sliding mode control model for quiet upright stance. Medical Engineering & Physics, 38(2): 204-208. 
2015 Barbieri D., Srinivasan D., Mathiassen S.E., Noguiera H. and Oliveira A.B. (2015). The ability of non-computer tasks to increase biomechanical exposure variability in computer-intensive office work. Ergonomics, 58(1): 50-64.
2015 Christian, M., & Nussbaum, M. A. (2015). An Exploratory Study of the Effects of Occupational Exposure to Physical Demands on Biomarkers of Cartilage and Muscle Damage. Journal of Occupational and Environmental Hygiene, 12(2): 138-144. 
2015 Christian, M., & Nussbaum, M. A. (2015). Responsiveness of selected biomarkers of tissue damage to external load and frequency during repetitive lumbar flexion/extension. International Journal of Industrial Ergonomics, 48(July 2015): 1-9. 
2015 Commissaris D.A.C.M., Huysmans M.A., Mathiassen S.E., Srinivasan D., Koppes L.L.J. and Hendriksen I.J.M. (2015). Interventions to increase physical activity and reduce sedentary behavior during productive work; a systematic review. Scandinavian Journal of Work, Environment & Health, 42(3): 181-191. 
2015 Garman, C. R., Franck, C. T., Nussbaum, M. A., & Madigan, M. L. (2015). A bootstrapping method to assess the influence of age, obesity, gender, and gait speed on probability of tripping as a function of obstacle height. Journal of Biomechanics, 48(6): 1229-1232. 
2015 Ghosh, S. and Dickerson, D. (2015). Modified Interaction Process Analysis as a Macroergonomic Method of Analyzing Communication Patterns in Construction. IIE Transactions on Occupational Ergonomics and Human Factors, 3(1): 45-57. 
2015 Horton, L. M., Nussbaum, M. A., & Agnew, M. J. (2015). Rotation During Lifting Tasks: Effects of Rotation Frequency and Task Order on Localized Muscle Fatigue and Performance. Journal of Occupational and Environmental Hygiene, 12(2): 95-106. 
2015 Jia, B., Nussbaum, M. A., & Agnew, M.J. (2015). A Stimulation Method to Assess the Contractile Status of the Lumbar Extensors in a Seated Posture. Human Factors and Ergonomics in Manufacturing & Service Industries, 25(6): 674-684. 
2015 Muslim, K., & Nussbaum, M. A. (2015). Musculoskeletal symptoms associated with posterior load carriage: An assessment of manual material handling workers in Indonesia. Work, 51(2): 205-213. 
2015 Ning, X. and Nussbaum, M.A. (2015). Passive lumbar tissue loading during trunk bending at three speeds: An in vivo study. Clinical Biomechanics, 30, 726-731. 
2015 Rashedi, E., & Nussbaum, M. A. (2015). Mathematical models of localized muscle fatigue: sensitivity analysis and assessment of two occupationally-relevant models. PLoS ONE, 10(12): e0143872. 
2015 Samani A., Srinivasan D., Mathiassen S.E. and Madeleine P.M. (2015). Nonlinear metrics assessing motor variability in a standardized pipetting task: Between- and within-subject variance components. Journal of Electromyography and Kinesiology, 25(3): 557-564. 
2015 Srinivasan D., Mathiassen S.E., Hallman D., Samani A., Madeleine P. and Lyskov E. (2015). Effects of concurrent physical and cognitive demands on muscle activity and heart rate variability in a repetitive upper-extremity precision task. European Journal of Applied Physiology, 116(1):227-39. 
2015 Srinivasan D., Mathiassen S.E., Samani A. and Madeleine P.M. (2015). The combined influence of task accuracy and pace on motor variability in a standardized repetitive precision task. Ergonomics, 58(8):1388-97. 
2015 Srinivasan D., Rudolfsson T., and Mathiassen S.E. (2015). Between- and within-subject variance of motor variability metrics in females performing repetitive upper-extremity precision work. Journal of Electromyography and Kinesiology, 25 (1): 121-129. 
2015 Srinivasan D., Samani A., Mathiassen S.E. and Madeleine P.M. (2015). The size and structure of arm movement variability decreased with work pace in a standardized repetitive precision task. Ergonomics, 58(1): 128-139. 
2015 Srinivasan, D., Mathiassen, S. E., Samani, A., & Madeleine, P. (2015). Effects of concurrent physical and cognitive demands on arm movement kinematics in a repetitive upper-extremity precision task. Human Movement Science, 42, 89-99. 
2015 Weidman, J., Dickerson, D. and Koebel, C.T. (2015). Prevention through Design: A Macroergonomic Conceptual Approach to Risk Reduction. IIE Transactions on Occupational Ergonomics and Human Factors, 3(1): 24-36. 
2015 Weidman, J., Dickerson, D., and Koebel, C. (2015). Intervention to Improve Purchasing Decision-Maker Perceptions of Ventilated Tools. Journal of Construction Engineering and Management, 04015007. 
2015 Weidman, J., Dickerson, D.E. and Koebel, C.T. (2015). Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model. Work, 52(4): 865-876. 
2015 Zhang, H., Nussbaum, M. A., & Agnew, M. J. (2015). A new method to assess passive and active ankle stiffness during quiet upright stance. Journal of Electromyography and Kinesiology, 25(6): 937-943. 
2014 Anderson, D. E., & Madigan, M. L. (2014). Healthy older adults have insufficient hip range of motion and plantar flexor strength to walk like healthy young adults. Journal of Biomechanics, 47(5): 1104-1109 
2014 Beringer, D.N., Nussbaum, M.A. & Madigan, M.L. (2014). Temporal Changes in the Required Shoe-Floor Friction when Walking following an Induced Slip. PLoS ONE, 9(5): e96525. 
2014 Cavuoto, L. & Nussbaum, M.A. (2014). Influences of Obesity on Job Demands and Worker Capacity. Current Obesity Reports, 3(3): 341-347. 
2014 Cavuoto, L. A., & Nussbaum, M. A. (2014). The Influences of Obesity and Age on Functional Performance During Intermittent Upper Extremity Tasks. Journal of Occupational and Environmental Hygiene, 11(9): 583-590. 
2014 Fino, P. and Lockhart, T.E., (2014): Required coefficient of friction during turning at self-selected slow, normal, and fast walking speeds.  Journal of Biomechanics, 47(6): 1395-1400. 
2014 Hindman, D., Bamberg, C., & Nussbaum, M. (2014). Bracing of Wood Composite I-Joists to Resist Lateral Buckling from Walking Loads. Journal of Construction Engineering and Management, 04014037 
2014 Kim, S. and Nussbaum, M. (2014). Evaluation of Two Approaches for Aligning Data Obtained from a Motion Capture System and an In-Shoe Pressure Measurement System. Sensors, 14(9): 16994-17007. 
2014 Kim, S., & Nussbaum, M. A. (2014). An evaluation of classification algorithms for manual material handling tasks based on data obtained using wearable technologies. Ergonomics, 57(7): 1040-1051. 
2014 Lee, J., Nussbaum, M. A., & Kyung, G. (2014). Effects of work experience on fatigue-induced biomechanical changes during repetitive asymmetric lifts/lowers. Ergonomics, 57(12): 1875-1885. 
2014 Liu, J., & Lockhart, T.E. (2014) Development and evaluation of a prior-to-impact fall event detection algorithm. IEEE Transactions on Biomedical Engineering, 61(7): 2135-2140. 
2014 Rashedi, E., Kim, S., Nussbaum, M. A., & Agnew, M. J. (2014). Ergonomic evaluation of a wearable assistive device for overhead work. Ergonomics, 57(12): 1864-1874. 
2014 Toosizadeh, N., & Nussbaum, M. A. (2014). Trunk Tissue Creep Can Increase Spine Forces During a Subsequent Lifting Task. IIE Transactions on Occupational Ergonomics and Human Factors, 2(2): 71-82. 
2014 Zhang, J., Lockhart, T.E., and Soangra, R., (2014): Classifying Lower Extremity Muscle Fatigue during Walking using Machine Learning and Inertial Sensors.  Annals of Biomedical Engineering, 42(3):  600-612. 
2013 Anderson, D. E., & Madigan, M. L. (2013). Effects of Age-Related Differences in Femoral Loading and Bone Mineral Density on Strains in the Proximal Femur During Controlled Walking. Journal of Applied Biomechanics, 29(5): 505-516. 
2013 Barker, L.M. and Nussbaum, M.A. (2013) Dimensions of fatigue as predictors of performance: a structural equation modeling approach among registered nurses. IIE Transactions on Occupational Ergonomics and Human Factors. 1, 16-30. 
2013 Cavuoto, L. A. & Nussbaum, M. A. (2013). Differences in functional performance of the shoulder musculature with obesity and aging. International Journal of Industrial Ergonomics, 43(5): 393-399. 
2013 Cavuoto, L.A. and Nussbaum, M.A. (2013) Obesity-related differences in muscular capacity during sustained isometric exertions. Applied Ergonomics, 44, 254-260. 
2013 Frames, C., Soangra, R. & Lockhart, T.E. (2013). Assessment of postural stability using inertial measurement unit on inclined surfaces in healthy adults - biomed 2013. Biomedical Sciences Instrumentation, 49:234-42. 
2013 Grzywacz, J.G., Quandt, S.A., Marín, A., Summers, P., Lang, W., Mills, T., Evia, C, Rushing, J. & Arcury, T.A. (2013). Feasibility of interactive voice response methods in health behavior research with immigrant Latinos. American Journal of Health Behavior, 37(2): 238-247. 
2013 Hendershot, B. D., Toosizadeh, N., Muslim, K., Madigan, M. L., & Nussbaum, M. A. (2013). Evidence for an exposure-response relationship between trunk flexion and impairments in trunk postural control. Journal of biomechanics, 46(14): 2554-2557. 
2013 Hindman, D. P., Timko, P. D. & Nussbaum, M. A. (2013). Mechanical Response of an Unbraced Wood Composite I-joist to Walking Loads. Journal of Construction Engineering and Management, 139(11): 04013023 (7 pages). 
2013 Hindman, D., Morris, J., Mohamadzadeh, M., Koch, L., Angles, J., and Smith-Jackson, T. (2013). Personal fall arrest system anchors in residential construction. Wood Design Focus, 23 (1): 20 – 27. 
2013 Horton, L.M., Nussbaum, M.A. and Agnew, M.J. (2013) Effects of rotation frequency and starting task on localized muscle fatigue and performance during simulated assembly work. IIE Transactions on Occupational Ergonomics and Human Factors. 1(3): 176-189. 
2013 Hung, Y-H, Smith-Jackson, T., Winchester, W., Kleiner, B.M. Babski-Reeves, K., and Mills, T.H. (2013). Identifying fall-protection training needs for residential roofing subcontractors.  Applied Ergonomics. 44(3):372-80. 
2013 Kim, S. and Nussbaum, M.A. (2013) Performance evaluation of a wearable inertial motion capture system for capturing physical exposures during manual material handling tasks. Ergonomics, 56, 314-326. 
2013 Lee, J. and Nussbaum, M.A. (2013) Experienced workers may sacrifice peak torso kinematics/kinetics for enhanced balance/stability during repetitive lifting. Journal of Biomechanics, 46, 1211-1215. 
2013 Lipscomb, H. J., Schoenfisch, A. L., Cameron, W., Kucera, K. L., Adams, D., & Silverstein, B. A. (2013). How well are we controlling falls from height in construction? Experiences of union carpenters in Washington State, 1989–2008. American Journal of Industrial Medicine, 57(1): 69-77. 
2013 Lipscomb, H. J., Schoenfisch, A., & Cameron, W. (2013). Work-Related Injuries Involving a Hand or Fingers Among Union Carpenters in Washington State, 1989 to 2008. Journal of Occupational and Environmental Medicine, 55(7): 832-838. 
2013 Liu, J. & Lockhart, T.E. (2013). Local dynamic stability associated with load carrying. Safety and Health at Work. 4(1): 46-51. 
2013 Liu, J.  & Lockhart, T.E. (2013). Automatic individual calibration in fall detection - an integrative ambulatory measurement framework. Computer Methods in Biomechanics and Biomedical Engineering. 16(5): 504-510. 
2013 Lockhart, T.E., Soangra, R., Zhang, J. & Wu, X. (2013). Wavelet based automated postural event detection and activity classification with single imu - biomed 2013. Biomedical Sciences Instrumentation, 49: 224-33. 
2013 Mehta, R.K. and Agnew, M.J. (2013). Exertion-dependent effects of physical and mental workload on physiological outcomes and task performance. IIE Transactions on Occupational Ergonomics and Human Factors, 1(1): 3-15. 
2013 Muslim, K., Bazrgari, B., Hendershot, B., Toosizadeh, N., Nussbaum, M.A. and Madigan, M.L. (2013) Disturbance and recovery of trunk mechanical and neuromuscular behaviors following repeated static trunk flexion: Influences of duration and duty cycle on creep-induced effects. Applied Ergonomics, 44, 643-651. 
2013 Quandt, SA, Kucera, KL, Haynes, C, Klein, BG, Langley, R, Agnew, M, Levin, JT, Howard, T, and Nussbaum, M. (2013) Occupational health outcomes for workers in the agriculture, forestry and fishing sector: implications for immigrant workers in the southeastern US. American Journal of Industrial Medicine, 56(8): 940-959. 
2013 Schoenfisch, A. L., Lipscomb, H. J., Marshall, S. W., Casteel, C., Richardson, D. B., Brookhart, M. A., & Cameron, W. (2013). Declining rates of work-related overexertion back injuries among union drywall installers in Washington State, 1989–2008: Improved work safety or shifting of care? American Journal of Industrial Medicine, 57(2): 184-194. 
2013 Schoenfisch, A. L., Lipscomb, H., Marshall, S., Cameron, W., Richardson, D., & Casteel, C. (2013). Work-related injuries among union drywall carpenters in Washington State, 1989–2008. American Journal of Industrial Medicine, 56(10): 1137-1148. 
2013 Soangra, R. & Lockhart, T.E. (2013). Comparison of intra individual physiological sway complexity from force plate and inertial measurement unit - biomed 2013. Biomedical Sciences Instrumentation, 49:180-6.  
2013 Toosizadeh, N. and Nussbaum, M.A. (2013) Creep deformation of the human trunk in response to prolonged and repetitive flexion: measuring and modeling the effect of external moment and flexion rate. Annals of Biomedical Engineering, 41, 1150-1161. 
2013 Toosizadeh, N., Bazrgari, B., Hendershot, B., Muslim, K., Nussbaum, M. A. & Madigan, M. L. (2013). Disturbance and recovery of trunk mechanical and neuromuscular behaviours following repetitive lifting: influences of flexion angle and lift rate on creep-induced effects. Ergonomics, 56(6): 954-963. 
2013 Yeoh, H.T., Lockhart, T.E. & Wu, X. (2013). Non-fatal occupational falls on the same level. Ergonomics. 56(2):153-65. 
2013 Yeoh, H.T., Lockhart, T.E. & Wu, X. (2013). Nonfatal occupational falls among U.S. health care workers, 2008-2010. Workplace Health & Safety, 61(1): 3-8. 
2012 Arcury, T.A., Mills, T., Marín, A.J., Summers, P., Quandt, S.A., Rushing, J., Lang, W., Grzywacz, J.G.  (2012). Work safety climate and safety practices among immigrant Latino residential construction workers.  American Journal of Industrial Medicine. 55(8): 736-745.  
2012 Bazrgari, B., Nussbaum, M.A. and Madigan, M.L. (2012) Estimation of trunk mechanical properties using system identification: effects of experimental setup and modeling assumptions. Computer Methods in Biomechanics and Biomedical Engineering, 15, 1001-1009 
2012 Callison, M.C. and Nussbaum, M.A. (2012) Identification of physically demanding patient-handling tasks in an acute care hospital: task analysis and survey results. International Journal of Industrial Ergonomics. 42, 261-267. 
2012 Evia, C, and Patriarca, A. (2012) Beyond Compliance: Participatory Translation of Safety Communication for Latino Construction Workers, Journal of Business and Technical Communication, 26(3): 340-367. 
2012 Forsyth, J. B., Martin, T. L., Young-Corbett, D. and Dorsa, E. (2012). Feasibility of Intelligent Monitoring of Construction Workers for Carbon Monoxide Poisoning, IEEE Transactions on Automation Science and Engineering, 9(3): 505-515.
2012 Grzywacz, J.G., Quandt, S.A., Marín, A., Summers, P., Lang, W., Mills, T., Evia, C., Rushing, J., Donadio, K. & Arcury, T.A. (2012). Occupational injury and work organization among immigrant Latino residential construction workers.  American Journal of Industrial Medicine.  55(8): 698-706. 
2012 Grzywacz, J.G., Quandt, S.A., Mills, T., Marín, A. Summers, P., Lang, W., Evia, C. & Arcury, T.A. (2012). Employer provision of personal protective equipment to Latino workers in North Carolina residential construction. New Solutions: A Journal of Environmental and Occupational Health Policy, 22(2): 175-190. 
2012 Hendershot, B.D., Bazrgari, B., Nussbaum, M.A. and Madigan M.L. (2012) Within- and between-day reliability of trunk mechanical behaviors estimated using position-controlled perturbations. Journal of Biomechanics, 45, 2019-2022. 
2012 Horton, L.M., Nussbaum, M.A. and Agnew, M.J. (2012) Effects of rotation frequency and task order on localized muscle fatigue and performance during repetitive static shoulder exertions. Ergonomics, 55, 1205-1217. 
2012 Yi, J., Jao, C, Kandas, I. L. N., Liu, B., Xu, Y. & Robinson, H. D. (2012) Irreversible adsorption of gold nanospheres on fiber optical tapers and microspheres, Applied Physics Letters, 100(15): 153107 (4 pages). 
2012 Kim, S. and Lockhart, T.E. (2012). Lower Limb Control and Mobility Following Exercise Training.  Journal of Neuroengineering and Rehabilitation, 9(15). PMCID: PMC3305391
2012 Kim, S., Nussbaum, M.A. and Jia, B. (2012). The benefits of an additional worker are task-dependent: assessing low-back injury risks during prefabricated (panelized) wall construction. Applied Ergonomics, 43(5): 843-849 
2012 Lee, J. and Nussbaum, M.A. (2012) Experienced workers exhibit distinct torso kinematics/kinetics and patterns of task dependency during repetitive lifts and lowers. Ergonomics, 55, 1535-1547. 
2012 Lin, D. and Nussbaum, M.A. (2012). Effects of lumbar extensor fatigue and surface inclination on postural control during quiet stance. Applied Ergonomics, 43, 1008-1015. 
2012 Lin, D., Nussbaum, M.A. and Madigan, M.L. (2012) Efficacy of three interventions at mitigating the adverse effects of muscle fatigue on postural control. Ergonomics, 55, 103-113. 
2012 Liu, J., Zhang, X. & Lockhart, T.E. (2012). Fall risk assessments based on postural and dynamic stability using inertial measurement unit. Safety and Health at Work. 3(3): 192-198. 
2012 Lockhart, T.E., Yeoh, H.T., Soangra, R., Jongprasithporn, M, Zhang, J., Wu, X. & Ghosh, A. (2012). Non-invasive fall risk assessment in community dwelling elderly with wireless inertial measurement units. Biomedical Sciences Instrumentation. 48: 260-267. 
2012 McCoy, A., Saunders, L., Kleiner, B.M. and Blismas, N.  (2012). Application of Safety Project Interview Data to a Cyclical Research Model of Translation.  ASC International Journal of Construction Education and Research,  8 (4): 260-280. 
2012 Mehta, R.K., Nussbaum, M.A, Agnew, M.J. (2012). Muscle- and task-dependent responses to concurrent physical and mental workload during intermittent static work. Ergonomics, 55, 1166-1179. 
2012 Mehta, R.M. and Agnew, M.J. (2012). Effects of physical and mental demands on shoulder muscle fatigue. WORK: A journal of prevention, assessment, and rehabilitation, 41, 2897-2901. 
2012 Miller, E.M., Bazrgari, B., Nussbaum, M.A., Madigan, M.L. (2012) Effects of gender, preload, and trunk angle on intrinsic trunk stiffness. Journal of Musculoskeletal Research, 15, 1250012 (9 pp).
2012 Murphy, M. M, Westman, E. C., Barczak, T. M. (2012) Attenuation and duration of seismic signals generated from controlled methane and coal dust explosions in an underground mine, International Journal of Rock Mechanics and Mining Sciences, 56(Dec 2012): 112-120. 
2012 Parijat, P. & Lockhart, T.E. (2012). Effects of moveable platform training in preventing slip-induced falls in older adults. Annals of Biomedical Engineering. 40(5): 1111-21. 
2012 Qu, X. and Nussbaum, M.A. (2012) Modelling 3D control of upright stance using an optimal control strategy. Computer Methods in Biomechanics and Biomedical Engineering, 15, 1053-1063. 
2012 Seimetz, C., Tan, D., Katayama, R. & Lockhart, T. (2012). A comparison between methods of measuring postural stability: force plates versus accelerometers. Biomedical  Sciences Instrumentation. 48:386-92. 
2012 Shewchuk, J. and Guo, C. (2012) Panel stacking, panel sequencing, and stack locating in residential construction: a lean approach. Journal of Construction Engineering and Management. 138(9): 1006-1016. 
2012 Singh, N., Taylor, W.R., Madigan, M.L. and Nussbaum, M.A. (2012). The spectral content of postural sway during quiet stance: influences of age, vision and somatosensory inputs. Journal of Electromyography and Kinesiology. 22, 131-136. 
2012 Soangra, R. & Lockhart, T.E. (2012). A comparative study for performance evaluation of sit-to-stand task with body worn sensor and existing laboratory methods. Biomedical  Sciences Instrumentation. 48:407-14. 
2012 Toosizadeh, N., Nussbaum, M.A., Bazrgari, B. and Madigan, M.L. (2012) Load-relaxation properties of the human trunk in response to prolonged flexion: measuring and modeling the effect of flexion angle. PLoS ONE, 7(11): e48625 
2012 Wu, X., Lockhart, T.E. and Yeoh, H., (2012).  Effects of obesity on slip-induced fall risks among young male adults. Journal of Biomechanics, 45(6): 1042-1047.  PMCID: PMC3310324 
2011 Barker, L.M. and Nussbaum, M.A. (2011) Fatigue, performance, and the work environment: a survey of registered nurses. Journal of Advanced Nursing, 67, 1370-1382. 
2011 Barker, L.M. and Nussbaum, M.A. (2011) The effects of fatigue on performance in simulated nursing work. Ergonomics. 54, 815-829. 
2011 Bazrgari, B., Hendershot, B., Muslim, K., Toosizadeh, N., Nussbaum, M.A. and Madigan, M.L. (2011) Disturbance and recovery of trunk mechanical and neuromuscular behaviors following prolonged trunk flexion: influences of duration and external load on creep-induced effects. Ergonomics. 54, 1043-1052. 
2011 Davidson, B.S., Madigan, M.L., Southward, S.C. and Nussbaum, M.A. (2011) Neural control of posture during small magnitude perturbations: effects of aging and localized muscle fatigue. IEEE Transactions on Biomedical Engineering. 58, 1546-1554 
2011 Evia, C. (2011) Localizing and Designing Computer-Based Safety Training Solutions for Hispanic Construction Workers,  Journal of Construction Engineering and Management. 137(6): 452-459. 
2011 Hendershot, B., Bazrgari, B., Muslim, K., Toosizadeh, N., Nussbaum, M.A. and Madigan, M.L. (2011) Disturbance and recovery of trunk stiffness and reflexive muscle responses following prolonged trunk flexion: influences of flexion angle and duration. Clinical Biomechanics. 26, 250-256. 
2011 Jia, B., Kim, S. and Nussbaum, M.A. (2011) An EMG-based model to estimate lumbar muscle forces and spinal loads during complex, high-effort tasks: development and application to residential construction using prefabricated walls. International Journal of Industrial Ergonomics. 41, 437-446. 
2011 Kim, S., Nussbaum, M.A. and Jia, B. (2011) Low back injury risks during construction with prefabricated (panelised) walls:  effects of task and design factors. Ergonomics. 54, 60-71 
2011 Lingard, H., Cooke, T. and Blismas, N. (2011). Coworkers’ response to occupational health and safety: An overlooked dimension of group-level safety climate in the construction industry?  Engineering, Construction and Architectural Management. 18(2): 159-175. 
2011 Lingard, H., Wakefield, R. and Cashin, P. (2011). The development and testing of a hierarchical measure of project OHS performance. Engineering, Construction and Architectural Management. 18(1): 30-49. 
2011 Liu, J., and Lockhart, T.E., (2011) Automatic individual calibration in fall detection: an integrative ambulatory measurement framework.  Computer Methods in Biomechanics and Biomedical Engineering. 1-7. PMCID: PMC3309173 
2011 Mehta R.M and Agnew, M.J. (2011). Effects of concurrent physical and mental demands for a short duration static task. International Journal of Industrial Ergonomics, 41, 488-493. 
2011 Mehta, R.K., Horton, L.M., Agnew, M.J. and Nussbaum, M.A. (2011) Ergonomic evaluation of hospital bed design features during patient handling tasks. International Journal of Industrial Ergonomics. 41, 647-652. 
2011 Metha, R.K, and Agnew, M.J. (2011). Influence of mental workload on muscle capacity during intermittent static work. European Journal of Applied Physiology, 112(8): 2891-2902. 
2011 Parijat, P., and Lockhart, T.E., (2011).  Effects of moveable platform training in preventing slip-induced falls in older adults.  Annals of Biomedical Engineering. 40(5): 1111-1121.  PMCID: PMC3319505 
2011 Park, S.H., Kim, S., Lockhart, T.E., Yoon, H.Y., and Lee, K., (2011)  Effects of Sound on Postural Stability During Standing.  Journal of Neuroengineering and Rehabilitation, 8:67.  PMCID: PMC3275494 
2011 Smith-Jackson, T., Artis, S., Hung, Y.H., Kim, Y.N., Hughes, C., Kleiner, B. and Nolden, A. (2011). Safety critical incidents among small construction contractors:  a prospective study. The Open Occupational Health & Safety Journal. 3: 39-47. 
2011 Wojcik, L.A., Nussbaum, M.A., Lin, D., Shibata, P.A. and Madigan, M.L. (2011). Age and gender moderate the effects of localized muscle fatigue on lower extremity joint torques used during quiet stance. Human Movement Science574-583. 
2010 Arcury, T., Grzywacz, J., Talton, J., Chen, H., Vallejos, Q., Galvan, L., Barr, D. and Quandt, S. (2010). Repeated pesticide exposure among North Carolina migrant and seasonal farmworkers. American Journal of Industrial Medicine. 53(8): 802-813. 
2010 Kim, S., Lockhart, T.E., and Nam, C.S., (2010). Leg Strength Comparison between younger and middle-age adults.  International Journal of Industrial Ergonomics, 40(3): 315-320. PMCID: PMC2861367 
2010 Lingard, H., Cooke, T. and Blismas, N. (2010). Properties of group safety climate in construction: The development and evaluation of a typology. Construction Management and Economics. 28(10): 1099-1112. 
2010 Lingard, H., Cooke, T. and Blismas, N. (2010). Safety climate in conditions of construction subcontracting: A multi-level analysis. Construction Management and Economics. 28(8): 813-825. 
2010 Mehta, R. and Agnew, M. (2010). Analysis of individual and occupational risk factors on task performance and biomechanical demands for a simulated drilling task. International Journal of Industrial Ergonomics. 40(5): 584-591.  
2010 Mehta, R.M., and Agnew, M.J. (2010). Analysis of individual and occupational risk factors on task performance and biomechanical demands for a simulated drilling task. International Journal of Industrial Ergonomics, 40(5): 584-591 
2010 Miller, E. Slota, G, Agnew, M.J. and Madigan M. (2010). Females exhibit shorter paraspinal reflex latencies than males in response to sudden trunk flexion perturbations. Clinical Biomechanics, 25(6): 541-545.
2010 Mongague, E. (2010). Validation of a trust in medical technology instrument. Applied Ergonomics. 41(6): 812-821. 
2010 Mongague, E., Winchester, W. and Kleiner, B. (2010). Trust in medical technology by patients and health care providers in obstetric work systems. Behavior and Information Technology. 29(5): 541–554. 
2010 Quandt, S., Jones, B.T., Talton, J.W., Whalley, L.E., Galvan, L., Vallejos, Q.M., Grzywacz, J., Chen, H., Pharr, K.E., Isom, S. and Arcury, T.A. (2010). Heavy metals exposure among Mexican farmworkers in eastern North Carolina. Environmental Research. 110(1): 83-88. 
2010 Young-Corbett, D.E., Nussbaum, M.A. and Winchester, W.W. (2010). Usability evaluation and redesign specifications for drywall sanding tools. International Journal of Industrial Ergonomics. 40, 112-118.
2009 Arcury, T.A., Grzywacz, J. G., Isom, S., Whalley, L.E., Vallejos, Q.M., Chen, H., Galván, L., Barr, D.B. and Quandt, S.A. (2009). Seasonal variation in the measurement of urinary pesticide metabolites among Latino farmworkers in eastern North Carolina. International Journal of Occupational and Environmental Health. 15(4): 339–350. 
2009 Davidson, B.S., Madigan, M.L., Nussbaum, M.A. and Wojcik, L.A. (2009). Effects of localized muscle fatigue on recovery from a postural perturbation without stepping. Gait & Posture. 29, 552-557.  
2009 Godwin, A., Agnew, M.J., Stevenson, J.M. (2009). Accuracy of Inertial Motion Sensors in static, quasi-static and complex, dynamic motion. Journal of Biomechanical Engineering, 131 (11): 114501-114505. 
2009 Godwin, A.A., Agnew, M.J., Takahara, G, and Stevenson, J.M. (2009). Functional data analysis as a means of evaluating individual variability in kinematic and kinetic waveforms. Theoretical Issues in Ergonomics Science,  11(6): 489-503. 
2009 Godwin, A.A., Stevenson, J.M., Agnew, M.J., Twiddy, A., Abdoli E. M. and Lotz, C.A.  (2009). Testing the efficacy of an ergonomic lifting aid at minimizing localized muscle fatigue in women over a prolonged period of lifting. International Journal of Industrial Ergonomics, 39, 121-126. 
2009 Graham, R.B., Agnew, M.J., Stevenson, J.M. (2009). Effectiveness of an on-body lifting aid at reducing low-back physical demands during an automotive assembly task: Assessment of EMG response and user acceptability. Applied Ergonomics, 40, 936-942. 
2009 Ikuma, L.H., Babski-Reeves, K. and Nussbaum, M.A. (2009). Experimental manipulation of psychosocial exposure and questionnaire sensitivity in a simulated manufacturing setting. International Archives of Occupational and Environmental Health. 82, 735-746.  
2009 Ikuma, L.H., Nussbaum, M.A. and Babski-Reeves, K.L. (2009). Reliability of physiological and subjective responses to physical and psychosocial exposures during a simulated manufacturing task. International Journal of Industrial Ergonomics. 39(5): 813-820. 
2009 Kim, S., Barker, L.M., Jia, B., Agnew, M.J. and Nussbaum, M.A. (2009). Effects of two hospital bed design features on physical demands and usability during brake engagement and patient transportation: a repeated measures experimental study. International Journal of Nursing Studies. 46, 317-325. 
2009 Lin, D., Nussbaum, M.A., Seol, H., Singh, N.B., Madigan, M.L. and Wojcik, L.A. (2009). Acute effects of localized muscle fatigue on postural control and patterns of recovery during upright stance: influence of fatigue location and age. European Journal of Applied Physiology. 106, 425-434 
2009 Liu, J., and Lockhart, T.E., (2009). Age-related joint moment characteristics during normal gait and successful reactive recovery from unexpected slip perturbations. Gait and Posture, 30 (3): 276-281.  PMID:  19581088 
2009 Lotz, C., Agnew, M., Godwin, A. and Stevenson, J. (2009). The Effect of an On-Body Personal Lift Assist Device (PLAD) on Fatigue During a Repetitive Lifting Task. Journal of Electromyography and Kinesiology. 19(2): 331-340. 
2009 Lotz, C.A, Agnew, M.J, Stevenson, J.M., Godwin, A.A. (2009). The effect of an on-body personal lift assist device (PLAD) on fatigue during a repetitive lifting task. Journal of Electromyography and Kinesiology, 19(2): 331-340. 
2009 Nussbaum, M.A., Shewchuk, J.P., Kim, S., Seol, H. and Guo, C. (2009). Development of a decision support system for residential construction using panelized walls: approach and preliminary results. Ergonomics. 52, 87-103.
2009 Qu, X. and Nussbaum, M.A. (2009). Effects of external loads on balance control during upright stance: experimental results and model-based predictions. Gait & Posture. 29, 23-30. 
2009 Qu, X., Nussbaum, M.A. and Madigan, M.L. (2009). Model-based assessments of the effects of age and ankle fatigue on the control of upright posture in humans. Gait & Posture. 30, 518-522. 
2009 Singh, N.B., Nussbaum, M.A. and Madigan, M.L. (2009). Evaluation of circumferential pressure as an intervention to mitigate postural instability induced by localized muscle fatigue at the ankle. International Journal of Industrial Ergonomics. 39, 821-827.  
2009 Yassierli and Nussbaum, M.A. (2009). Effects of age, gender, and task parameters on fatigue development during intermittent isokinetic torso extensions. International Journal of Industrial Ergonomics. 39, 185-191. 
2009 Young-Corbett, D.E. and Nussbaum, M.A. (2009). Dust control effectiveness of drywall sanding tools. Journal of Occupational and Environmental Hygiene. 6, 385-389. 
2009 Young-Corbett, D.E. and Nussbaum, M.A. (2009). Dust control technology usage patterns in the drywall finishing industry. Journal of Occupational and Environmental Hygiene. 6, 315-323.
2008 Andrews, D.M., Potvin, J.R., Calder, C.I., Cort, J., Agnew, M.J., Stephens, A. (2008).  Acceptable peak forces and impulses during manual hose insertions in the automobile industry. International Journal of Industrial Ergonomics, 38(2): 193-201. 
2008 Calder, K., Agnew, M.J., Stashuk, D., McLean, L. (2008). Reliability of quantitative EMG analysis of the extensor carpi radialis muscle. Journal of Neuroscience Methods, 168, 483-493. 
2008 DiDomenico, A. and Nussbaum, M.A. (2008). Estimation of forces exerted by the fingers using standardized surface EMG from the forearm. Ergonomics. 51, (6): 858-871.  
2008 Granata, K. and Lockhart, T. (2008). Dynamic stability differences in fall-prone and healthy adults. Journal of Electromyography and Kinesiology. 18(2): 172-178. 
2008 Haro, E. and Kleiner, B. (2008). Macroergonomics as an organizing process for systems safety. Applied Ergonomics. 39(4): 450-458. 
2008 Iridiastadi, H., Nussbaum, M.A. and van Dieen, J.H. (2008). Muscular load characterization during isometric non-isotonic shoulder abductions with varying force. Journal of Electromyography and Kinesiology. 18(4): 695-703. 
2008 Kim, S., Nussbaum, M.A. and Madigan, M.L. (2008). Direct parameterization of postural stability during quiet upright stance: effects of age and altered sensory conditions. Journal of Biomechanics. 41 (2): 406-411. 
2008 Kim, S., Seol, H., Ikuma, L.H. and Nussbaum, M.A. (2008). Knowledge and opinions of designers of industrialized wall panels regarding incorporating ergonomics in design. International Journal of Industrial Ergonomics. 38(2); 150-157. 
2008 Kleiner, B. and Hendrick, H. (2008). Human Factors in organizational design and management of industrial plants. International Journal of Technology and Human Interaction. 4(1): 113-127. 
2008 Kleiner, B. M.  (2008). Macroegonomics: Work system analysis and design. Human Factors. 50(3): 461-467. 
2008 Kleiner, B., Smith-Jackson, T., Mills, T., O'Brien, M. and Haro, E. (2008). Design, Development, and Deployment of a Rapid Universal Safety and Health System for Construction. Journal of Construction Engineering and Management.  134(4): 273-279. 
2008 Lin, D., Seol, H., Nussbaum, M.A. and Madigan, M.L. (2008). Reliability of COP-based postural sway measures and age-related differences. Gait & Posture. 28, 337-342. 
2008 Lucas, J., Thabet, W. and Worlikar, P. (2008). A VR-Based Training Program for Conveyor Belt Safety. Journal of Information Technology in Construction. 13: 381-407. 
2008 Parijat, P. and Lockhart, T. (2008). Effects of quadriceps fatigue on the biomechanics of gait and slip propensity. Gait & Posture. 28(4): 568-573. 
2008 Tran, G., Babski-Reeves, K.L. and Nussbaum, M.A. (2008). Electromyographic evaluation of a bed assistive device for abdominal surgery patients in postoperative care.  Human Factors. 50, 237-255. 
2008 Yassierli, and Nussbaum, M. (2008). Utility of traditional and alternative EMG-based measures of fatigue during low-level isometric efforts. Journal of Electromyography and Kinesiology. 18(1): 44-53. 
2007 Bieryla, K., Madigan, M.L. and Nussbaum, M.A. (2007). Practicing recovery from a simulated trip improves recovery kinematics after an actual trip. Gait & Posture. 26, 208-213.  
2007 Grugle, N.L. and Kleiner, B.M. (2007). The effects of chemical protective equipment on team process performance in small unit rescue operations. Applied Ergonomics.38 (5): 591-600.    
2007 Kim, S. and Lockhart, T. (2007). The Effects of 10% Front Load Carriage on the Likelihood of Slips and Falls. Industrial Health. 46(1): 32-39.    
2007 Krausman, A. and Nussbaum, M.A. (2007). Effects of wearing chemical protective clothing on text entry when using wearable input devices. International Journal of Industrial Ergonomics. 37, 525-530 
2007 Qu, X., Nussbaum, M.A. and Madigan, M.L. (2007). A balance control model based on an optimal control strategy. Journal of Biomechanics. 40, 3590-3597. 
2007 Smith-Jackson, T. and Wogalter, M. (2007). Application of a mental models approach to MSDS Design. Theoretical Issues in Ergonomics Science. 2007, 8(4): 303-319. 
2007 Sood, D., Nussbaum, M.A. and Hager, K. (2007). Fatigue during prolonged intermittent overhead work: reliability of measures and effects of working height. Ergonomics. 50, 497-513. 
2007 Yassierli and Nussbaum, M.A. (2007). Muscle fatigue during intermittent isokinetic shoulder abduction: age effects and utility of electromyographic measures. Ergonomics. 50, 1110-1126. 
2007 Yassierli, Nussbaum, M.A., Iridiastadi, H. and Wojcik, L. (2007). The influence of age on isometric endurance and fatigue is muscle dependent: a study of shoulder abduction and torso extension. Ergonomics. 50(1); 26-45. 
2006 Kleiner, B. (2006). Macroergonomics: analysis and design of work systems. Applied Ergonomics. 37(1): 81-89. 
2004 Kleiner, B. (2004). Macroergonomics as a large work-system transformation technology. Human Factors and Ergonomics in Manufacturing & Service Industries. 14(2): 99-115.